Load data for 9 mm Browning Court (.380 ACP) + .356 | 120gr | H&N RN F

Recommended Powder(s): Maxam CSB 2, Rottweil P 801

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.356 \| 120gr \| H&N RN F
Bullet Weight:	120gr \| 7.8g
Bullet Diameter:	0.356" \| 9.04mm
Bullet Length:	0.551" \| 14.0mm
Caliber:	9 mm Browning Court (.380 ACP) load data
Case Length (l3):	0.681" \| 17.3mm
Cartridge Length (C.O.L.):	0.969" \| 24.6mm
Seated Depth:	0.263" \| 6.7mm
Shank Seated Depth:	0.263" \| 6.7mm
Case Capacity:	12.2 Grains of Water \| 0.79 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	19580 psi \| 1350 bar
LID:	LID_B7442_C1213
Last updated:	2025-01-01

Load data for 72 loads in caliber 9 mm Browning Court (.380 ACP) with .356 | 120gr | H&N RN F bullet and 36 powders such as Maxam CSB 2, Rottweil P 801. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 70N	<<locked>>	76%	16128	82%	**6	96%
ADI APS 350	<<locked>>	69%	17405	89%	**8	100%
ADI APS 450	<<locked>>	69%	16027	82%	**4	100%
ADI AS 30	<<locked>>	81%	17376	89%	**0	100%
ADI AS 50N	<<locked>>	77%	16360	84%	**6	99%
[Accurate No. 2]*	<<locked>>	81%	17477	89%	**0	84%
Accurate Solo 1000	<<locked>>	76%	16317	83%	**7	99%
Accurate Solo 1250	<<locked>>	90%	17129	88%	**3	95%
[Alliant BULLSEYE]*	<<locked>>	77%	17114	87%	**2	89%
[Alliant UNIQUE]*	<<locked>>	93%	16578	85%	**2	88%
Baschieri & Pellagri 100	<<locked>>	80%	15447	79%	**7	97%
Hodgdon Clays	<<locked>>	69%	17376	89%	**8	100%
Hodgdon Universal	<<locked>>	84%	16128	82%	**6	96%
Lovex S011	<<locked>>	66%	15722	80%	**0	95%
Lovex S020	<<locked>>	86%	17405	89%	**6	91%
Maxam CSB 1	<<locked>>	91%	15824	81%	**6	94%
Maxam CSB 2 👍	<<locked>>	94%	14344	73%	**2	99%
Maxam CSB 3	<<locked>>	83%	15795	81%	**3	98%
Maxam CSB 4	<<locked>>	80%	16172	83%	**0	99%
Maxam CSB 5	<<locked>>	77%	17492	89%	**3	100%
[Ramshot Silhouette]*	<<locked>>	76%	17202	88%	**6	85%
ReloadSwiss RS 12	<<locked>>	85%	16215	83%	**5	100%
[ReloadSwiss RS 20]*	<<locked>>	94%	15954	82%	**2	89%
Rottweil P 801 👍	<<locked>>	77%	16563	85%	**9	100%
[SNPE Vectan A0]*	<<locked>>	89%	16288	83%	**3	86%
SNPE Vectan BA 9	<<locked>>	78%	15679	80%	**7	91%
SNPE Vectan BA10	<<locked>>	64%	16027	82%	**4	100%
SNPE Vectan BA9 1/2	<<locked>>	84%	16273	83%	**9	94%
[Somchem MP200]*	<<locked>>	82%	15766	80%	**9	85%
[Somchem MS200]*	<<locked>>	87%	17027	87%	**3	89%
Vihtavuori N310	<<locked>>	67%	17477	89%	**0	100%
Vihtavuori N320	<<locked>>	82%	15679	80%	**3	100%
Vihtavuori N32C Tin Star	<<locked>>	96%	10414	53%	**1	100%
Vihtavuori N330	<<locked>>	87%	15911	81%	**2	96%
[Vihtavuori N340]*	<<locked>>	91%	16853	86%	**9	88%
Winchester 231	<<locked>>	67%	15737	80%	**0	95%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
[ADI AP 70N]*²	<<locked>>	59%	9485	48%	**2	87%
ADI APS 350	<<locked>>	63%	14649	75%	**5	100%
ADI APS 450	<<locked>>	63%	13692	70%	**5	100%
[ADI AS 30]²	<<locked>>	58%	9181	47%	**3	98%
ADI AS 50N	<<locked>>	62%	10515	54%	**2	94%
[Accurate No. 2]*	<<locked>>	77%	15273	78%	**7	81%
Accurate Solo 1000	<<locked>>	60%	10428	53%	**6	95%
[Accurate Solo 1250]*	<<locked>>	65%	8470	43%	**3	83%
[Alliant BULLSEYE]*	<<locked>>	63%	11632	59%	**1	82%
[Alliant UNIQUE]*	<<locked>>	79%	11603	59%	**4	81%
[Baschieri & Pellagri 100]*	<<locked>>	60%	8499	43%	**9	89%
Hodgdon Clays	<<locked>>	63%	14562	74%	**2	100%
[Hodgdon Universal]*	<<locked>>	61%	8122	41%	**6	84%
Lovex S011	<<locked>>	62%	13750	70%	**8	93%
[Lovex S020]*	<<locked>>	69%	10095	52%	**1	82%
[Maxam CSB 1]*	<<locked>>	71%	9282	47%	**9	85%
[Maxam CSB 2]*	<<locked>>	69%	7194	37%	**2	88%
Maxam CSB 3	<<locked>>	63%	8833	45%	**2	90%
[Maxam CSB 4]²	<<locked>>	58%	8615	44%	**3	93%
Maxam CSB 5	<<locked>>	61%	10718	55%	**8	100%
[Ramshot Silhouette]*	<<locked>>	69%	13764	70%	**7	81%
ReloadSwiss RS 12	<<locked>>	63%	7731	39%	**8	94%
[ReloadSwiss RS 20]*	<<locked>>	81%	11298	58%	**8	81%
Rottweil P 801	<<locked>>	60%	9268	47%	**1	98%
[SNPE Vectan A0]*	<<locked>>	80%	12879	66%	**8	82%
[SNPE Vectan BA 9]*	<<locked>>	61%	9456	48%	**6	82%
[SNPE Vectan BA10]²	<<locked>>	59%	13677	70%	**5	100%
[SNPE Vectan BA9 1/2]*	<<locked>>	60%	8369	43%	**9	82%
[Somchem MP200]*	<<locked>>	73%	12531	64%	**4	80%
[Somchem MS200]*	<<locked>>	73%	11835	60%	**4	83%
Vihtavuori N310	<<locked>>	62%	14779	75%	**7	100%
Vihtavuori N320	<<locked>>	61%	8412	43%	**2	93%
Vihtavuori N32C Tin Star	<<locked>>	84%	7760	40%	**9	99%
[Vihtavuori N330]*	<<locked>>	64%	8151	42%	**9	83%
[Vihtavuori N340]*	<<locked>>	77%	11458	59%	**8	81%
[Winchester 231]²	<<locked>>	59%	12082	62%	**8	91%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data